Hi-Tech Amaze S410 Recovery and Fastboot Mode

Want to Boot Hi-Tech Amaze S410 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Hi-Tech Amaze S410 to Recovery Mode.

Hi-Tech Amaze S410 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Hi-Tech Amaze S410 to Recovery.

Also: Hi-Tech Amaze S1 Recovery Mode and Fastboot Mode

Boot Hi-Tech Amaze S410 into Recovery Mode

Below are the methods using which you can boot Hi-Tech Amaze S410 into Recovery Mode.

Boot Hi-Tech Amaze S410 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Down and Power button together for a few seconds.
3. When you see a change on the screen, release the Power button but still press Volume down.
   
4. If you will see the Android robot, press and hold the Power key and at the same time press Volume up key.
5. Now, your phone should boot into Recovery Mode.

Boot Hi-Tech Amaze S410 into Recovery using ADB command

1. First of all, make sure you have installed Hi-Tech Amaze S410 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Hi-Tech Amaze S410 into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Hi-Tech Amaze S410