Allview V3 Viper Recovery and Fastboot Mode

Want to Boot Allview V3 Viper into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Allview V3 Viper to Recovery Mode.

Allview V3 Viper Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Allview V3 Viper to Recovery.

Also: Allview P8 eMagic Recovery Mode and Fastboot Mode

Boot Allview V3 Viper into Recovery Mode

Below are the methods using which you can boot Allview V3 Viper into Recovery Mode.

Boot Allview V3 Viper Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power Button as soon as you see the Allview Logo on the screen.
4. Release the Volume Up Button when the device boots into Recovery Mode.
   

Boot Allview V3 Viper into Recovery using ADB command

1. First of all, make sure you have installed Allview V3 Viper USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Allview V3 Viper into Recovery Mode.

   adb reboot recovery

Boot Allview V3 Viper into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Allview V3 Viper