Allview P6 Stony Recovery and Fastboot Mode

Want to Boot Allview P6 Stony into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Allview P6 Stony to Recovery Mode.

Allview P6 Stony Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Allview P6 Stony to Recovery.

Also: Allview X1 Xtreme Mini Recovery Mode and Fastboot Mode

Boot Allview P6 Stony into Recovery Mode

Below are the methods using which you can boot Allview P6 Stony into Recovery Mode.

Boot Allview P6 Stony Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Allview logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Allview P6 Stony into Recovery using ADB command

1. First of all, make sure you have installed Allview P6 Stony USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Allview P6 Stony into Recovery Mode.

   adb reboot recovery

Boot Allview P6 Stony into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Allview P6 Stony