Coopad Cool Changer S1 Recovery and Fastboot Mode

Want to Boot Coopad Cool Changer S1 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Coopad Cool Changer S1 to Recovery Mode.

Coopad Cool Changer S1 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Coopad Cool Changer S1 to Recovery.

Also: CoolPAD 8085N Recovery Mode and Fastboot Mode

Boot Coopad Cool Changer S1 into Recovery Mode

Below are the methods using which you can boot Coopad Cool Changer S1 into Recovery Mode.

Boot Coopad Cool Changer S1 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Coolpad logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Coopad Cool Changer S1 into Recovery using ADB command

1. First of all, make sure you have installed Coopad Cool Changer S1 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Coopad Cool Changer S1 into Recovery Mode.

   adb reboot recovery

Boot Coopad Cool Changer S1 Download Mode

1. Power off your Phone.
2. Connect a USB cable to PC or Laptop.
3. Hold the Volume Up + Power button for a few seconds and then connect the other end of the USB Cable to mobile.
4. Release the keys as soon as you see the Download Mode on the Screen.
5. Now, your phone should boot into Download Mode.

Related Tutorials

How to Factory Reset Coopad Cool Changer S1