Doogee S95 Pro Recovery and Fastboot Mode

Want to Boot Doogee S95 Pro into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Doogee S95 Pro to Recovery Mode.

Doogee S95 Pro Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Doogee S95 Pro to Recovery.

Also: Doogee S68 Pro Recovery Mode and Fastboot Mode

Boot Doogee S95 Pro into Recovery Mode

Below are the methods using which you can boot Doogee S95 Pro into Recovery Mode.

Boot Doogee S95 Pro Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Recovery Mode on the screen.
4. Now, your phone should boot into Recovery Mode.

Boot Doogee S95 Pro into Recovery using ADB command

1. First of all, make sure you have installed Doogee S95 Pro USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Doogee S95 Pro into Recovery Mode.

   adb reboot recovery

Boot Doogee S95 Pro into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Doogee S95 Pro into Bootloader Mode or Fastboot Mode.

Boot Doogee S95 Pro Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Plug one end of the USB cable to PC and while holding the Volume Down button connect the other end of the cable to your device.
3. Now, your phone should boot into Fastboot Mode.

Boot Doogee S95 Pro Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot Doogee S95 Pro Download Mode

1. Power off your Phone.
2. Press and hold Volume Down + Volume Up buttons together for a few seconds.
3. Plug one end of the USB cable to PC and while holding these Keys connect the other end of the cable to your device.
4. Release the Volume buttons once the device boots into Download Mode.
5. To exit the Download Mode, press and hold the Power button until the device reboots.

Related Tutorials

How to Factory Reset Doogee S95 Pro