Doogee S30 Recovery and Fastboot Mode

Want to Boot Doogee S30 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Doogee S30 to Recovery Mode.

Doogee S30 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Doogee S30 to Recovery.

Also: Doogee X11 Recovery Mode and Fastboot Mode

Boot Doogee S30 into Recovery Mode

Below are the methods using which you can boot Doogee S30 into Recovery Mode.

Boot Doogee S30 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the keys as soon as you see the Doogee logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Doogee S30 into Recovery using ADB command

1. First of all, make sure you have installed Doogee S30 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Doogee S30 into Recovery Mode.

   adb reboot recovery

Boot Doogee S30 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Doogee S30