Evercoss AT7S Recovery and Fastboot Mode

Want to Boot Evercoss AT7S into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Evercoss AT7S to Recovery Mode.

Evercoss AT7S Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Evercoss AT7S to Recovery.

Also: Evercoss Xtream 1 Plus Recovery Mode and Fastboot Mode

Boot Evercoss AT7S into Recovery Mode

Below are the methods using which you can boot Evercoss AT7S into Recovery Mode.

Boot Evercoss AT7S Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power key as soon as you see the Evercoss Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
   

Boot Evercoss AT7S into Recovery using ADB command

1. First of all, make sure you have installed Evercoss AT7S USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Evercoss AT7S into Recovery Mode.

   adb reboot recovery

Boot Evercoss AT7S into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Evercoss AT7S