Fero Power Recovery and Fastboot Mode

Want to Boot Fero Power into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Fero Power to Recovery Mode.

Fero Power Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Fero Power to Recovery.

Also: Fero A4001 Recovery Mode and Fastboot Mode

Boot Fero Power into Recovery Mode

Below are the methods using which you can boot Fero Power into Recovery Mode.

Boot Fero Power Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume UP and Power button together for a few seconds.
3. When you see a change on the screen, release Power key.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
   

Boot Fero Power into Recovery using ADB command

1. First of all, make sure you have installed Fero Power USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Fero Power into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Fero Power