Fujitsu Arrows NX F-01J Recovery and Fastboot Mode

Want to Boot Fujitsu Arrows NX F-01J into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Fujitsu Arrows NX F-01J to Fastboot Mode or Recovery Mode.

Fujitsu Arrows NX F-01J Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Fujitsu Arrows NX F-01J Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Fujitsu Arrows NX F-01J into Recovery Mode and Fastboot Mode.

Also: Fujitsu Arrows Fit F-01H Recovery Mode and Fastboot Mode

Boot Fujitsu Arrows NX F-01J into Recovery Mode

Below are the methods using which you can boot Fujitsu Arrows NX F-01J into Recovery Mode.

Boot Fujitsu Arrows NX F-01J Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, press the Power button to enter into the Recovery Mode.
6. While holding down the Power key press the Volume Up button at once.
   

Boot Fujitsu Arrows NX F-01J into Recovery using ADB command

1. First of all, make sure you have installed Fujitsu Arrows NX F-01J USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Fujitsu Arrows NX F-01J into Recovery Mode.

   adb reboot recovery

Boot Fujitsu Arrows NX F-01J into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Fujitsu Arrows NX F-01J into Bootloader Mode or Fastboot Mode.

Boot Fujitsu Arrows NX F-01J Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Fujitsu Arrows NX F-01J Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Fujitsu Arrows NX F-01J