Want to Boot Gionee GN5001 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Gionee GN5001 to Fastboot Mode or Recovery Mode.
Gionee GN5001 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Gionee GN5001 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Gionee GN5001 into Recovery Mode and Fastboot Mode.
Also: Gionee A1 Recovery Mode and Fastboot Mode
Boot Gionee GN5001 into Recovery Mode
Below are the methods using which you can boot Gionee GN5001 into Recovery Mode.
Boot Gionee GN5001 Recovery Mode using Hardware Buttons
- First of all, power off your phone.
- Now, press and hold the Volume Up and Power button together for a few seconds.
- Release the keys as soon as you see the Android logo and wait for few seconds.
- Now, press the Power button to enter into the Recovery Mode.
Boot Gionee GN5001 into Recovery using ADB command
- First of all, make sure you have installed Gionee GN5001 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Gionee GN5001 into Recovery Mode.
adb reboot recovery
Related Tutorials
How to Factory Reset Gionee GN5001
LEAVE A REPLY