Gionee CTRL V4 Recovery and Fastboot Mode

Want to Boot Gionee CTRL V4 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Gionee CTRL V4 to Fastboot Mode or Recovery Mode.

Gionee CTRL V4 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Gionee CTRL V4 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Gionee CTRL V4 into Recovery Mode and Fastboot Mode.

Also: Gionee Infinity Passion Recovery Mode and Fastboot Mode

Boot Gionee CTRL V4 into Recovery Mode

Below are the methods using which you can boot Gionee CTRL V4 into Recovery Mode.

Boot Gionee CTRL V4 Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Gionee logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.
   

Boot Gionee CTRL V4 into Recovery using ADB command

1. First of all, make sure you have installed Gionee CTRL V4 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Gionee CTRL V4 into Recovery Mode.

   adb reboot recovery

Boot Gionee CTRL V4 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Gionee CTRL V4