Lenovo ZUK Edge Recovery and Fastboot Mode

Want to Boot Lenovo ZUK Edge into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Lenovo ZUK Edge to Fastboot Mode or Recovery Mode.

Lenovo ZUK Edge Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Lenovo ZUK Edge Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Lenovo ZUK Edge into Recovery Mode and Fastboot Mode.

Also: Lenovo Zuk Edge L Z2151 Recovery Mode and Fastboot Mode

Boot Lenovo ZUK Edge into Recovery Mode

Below are the methods using which you can boot Lenovo ZUK Edge into Recovery Mode.

Boot Lenovo ZUK Edge Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Down + Power button together for a few seconds.
3. Hold down the Power button as you see the Lenovo logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Lenovo ZUK Edge into Recovery using ADB command

1. First of all, make sure you have installed Lenovo ZUK Edge USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Lenovo ZUK Edge into Recovery Mode.

   adb reboot recovery

Boot Lenovo ZUK Edge into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Lenovo ZUK Edge into Bootloader Mode or Fastboot Mode.

Boot Lenovo ZUK Edge Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold Volume Up + Power button together for a few seconds.
3. Now, your phone should boot into Fastboot Mode.

Boot Lenovo ZUK Edge Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Lenovo ZUK Edge