Want to Boot Jiake N7100 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Jiake N7100 to Fastboot Mode or Recovery Mode.
Jiake N7100 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Jiake N7100 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Jiake N7100 into Recovery Mode and Fastboot Mode.
Also: Jiake M6 Recovery Mode and Fastboot Mode
Boot Jiake N7100 into Recovery Mode
Below are the methods using which you can boot Jiake N7100 into Recovery Mode.
Boot Jiake N7100 Recovery Mode using Hardware Buttons
- First of all, power off your phone.
- Now, press and hold the Volume Up + Home and Power button together for a few seconds.
- Release the keys as soon as you see the Jiake logo and wait for few seconds.
- Now, your phone should boot into Recovery Mode.
Boot Jiake N7100 into Recovery using ADB command
- First of all, make sure you have installed Jiake N7100 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Jiake N7100 into Recovery Mode.
adb reboot recovery
Boot Jiake N7100 Download Mode
- Power off your Phone.
- Now, press and hold the Volume Down + Home and Power button together for a few seconds.
- Release the keys as soon as you see the Jiake logo and wait for few seconds.
- Now, your phone should boot into Download Mode.
- To exit the Download Mode, press and hold the Power button until the device reboots.
Related Tutorials
How to Factory Reset Jiake N7100
LEAVE A REPLY