Jiayu G3C Recovery and Fastboot Mode

Want to Boot Jiayu G3C into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Jiayu G3C to Recovery Mode.

Jiayu G3C Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Jiayu G3C to Recovery.

Also: Jiayu G5 Advanced Recovery Mode and Fastboot Mode

Boot Jiayu G3C into Recovery Mode

Below are the methods using which you can boot Jiayu G3C into Recovery Mode.

Boot Jiayu G3C Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Plug one end of the USB cable to PC and while holding the Volume Up button connect the other end of the cable to your device.
   
3. Release the keys as soon as you see the Android logo and wait for few seconds.
   
4. Now, press the Power button to enter into the Recovery Mode.
   

Boot Jiayu G3C into Recovery using ADB command

1. First of all, make sure you have installed Jiayu G3C USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Jiayu G3C into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Jiayu G3C