Want to Boot Kyocera Hydro Wave C6740 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Kyocera Hydro Wave C6740 to Recovery Mode.
Kyocera Hydro Wave C6740 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Here we have shared two methods which will help in booting Kyocera Hydro Wave C6740 to Recovery.
Also: Kyocera Rafre KYV40 Recovery Mode and Fastboot Mode
Boot Kyocera Hydro Wave C6740 into Recovery Mode
Below are the methods using which you can boot Kyocera Hydro Wave C6740 into Recovery Mode.
Boot Kyocera Hydro Wave C6740 Recovery Mode using Hardware Buttons
- Power off your phone.
- Once the device is off. Press and hold the Volume Down and Power button together for a few seconds.
- Release the keys as soon as you see the Kyocera logo and wait for few seconds.
- Now, your phone should boot into Recovery Mode.
Boot Kyocera Hydro Wave C6740 into Recovery using ADB command
- First of all, make sure you have installed Kyocera Hydro Wave C6740 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Kyocera Hydro Wave C6740 into Recovery Mode.
adb reboot recovery
Related Tutorials
How to Factory Reset Kyocera Hydro Wave C6740
LEAVE A REPLY