Kyocera Digno V Recovery and Fastboot Mode

Want to Boot Kyocera Digno V into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Kyocera Digno V to Recovery Mode.

Kyocera Digno V Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Kyocera Digno V to Recovery.

Also: Kyocera DuraScout E6782 Recovery Mode and Fastboot Mode

Boot Kyocera Digno V into Recovery Mode

Below are the methods using which you can boot Kyocera Digno V into Recovery Mode.

Boot Kyocera Digno V Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Down and Power button together for a few seconds.
3. Release the keys as soon as you see the Kyocera logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Kyocera Digno V into Recovery using ADB command

1. First of all, make sure you have installed Kyocera Digno V USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Kyocera Digno V into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Kyocera Digno V