Lanix Ilium L610 Recovery and Fastboot Mode

Want to Boot Lanix Ilium L610 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Lanix Ilium L610 to Recovery Mode.

Lanix Ilium L610 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Lanix Ilium L610 to Recovery.

Also: Lanix Ilium L1050 Recovery Mode and Fastboot Mode

Boot Lanix Ilium L610 into Recovery Mode

Below are the methods using which you can boot Lanix Ilium L610 into Recovery Mode.

Boot Lanix Ilium L610 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Down and Power button together for a few seconds.
3. When you see a change on the screen, release all keys.
4. Now, press the Volume Up button to enter into the Recovery Mode.
   

Boot Lanix Ilium L610 into Recovery using ADB command

1. First of all, make sure you have installed Lanix Ilium L610 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Lanix Ilium L610 into Recovery Mode.

   adb reboot recovery

Boot Lanix Ilium L610 into Factory Mode

1. First of all, power off the device.
2. Once the device is off, press and hold the Volume Down and Power buttons together for a few seconds.
3. When you see a change on the screen, release all keys.
4. Now, press the Volume Down button to enter into the Factory Mode.
   

Related Tutorials

How to Factory Reset Lanix Ilium L610