Leotec Argon A250b Recovery and Fastboot Mode

Want to Boot Leotec Argon A250b into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Leotec Argon A250b to Recovery Mode.

Leotec Argon A250b Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Leotec Argon A250b to Recovery.

Also: Leotec Pulsar IS3G 7″ Recovery Mode and Fastboot Mode

Boot Leotec Argon A250b into Recovery Mode

Below are the methods using which you can boot Leotec Argon A250b into Recovery Mode.

Boot Leotec Argon A250b Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power key as soon as you see the Leotec logo and wait for few seconds.
4. As soon as Android logo appears, Release the Volume Up button.
5. Now, press the Power button to enter into the Recovery Mode.
   

Boot Leotec Argon A250b into Recovery using ADB command

1. First of all, make sure you have installed Leotec Argon A250b USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Leotec Argon A250b into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Leotec Argon A250b