Micromax Q4151 Recovery and Fastboot Mode

Want to Boot Micromax Q4151 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Micromax Q4151 to Fastboot Mode or Recovery Mode.

Micromax Q4151 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Micromax Q4151 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Micromax Q4151 into Recovery Mode and Fastboot Mode.

Also: Micromax Funbook P500 Recovery Mode and Fastboot Mode

Boot Micromax Q4151 into Recovery Mode

Below are the methods using which you can boot Micromax Q4151 into Recovery Mode.

Boot Micromax Q4151 Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Micromax logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Micromax Q4151 into Recovery using ADB command

1. First of all, make sure you have installed Micromax Q4151 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Micromax Q4151 into Recovery Mode.

   adb reboot recovery

Boot Micromax Q4151 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Micromax Q4151 into Bootloader Mode or Fastboot Mode.

Boot Micromax Q4151 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Now, your phone should boot into Fastboot Mode.

Boot Micromax Q4151 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Micromax Q4151