Want to Boot Micromax Bolt Q333 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Micromax Bolt Q333 to Fastboot Mode or Recovery Mode.
Micromax Bolt Q333 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Micromax Bolt Q333 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Micromax Bolt Q333 into Recovery Mode and Fastboot Mode.
Also: Micromax Canvas Juice 4 Q382 Recovery Mode and Fastboot Mode
Boot Micromax Bolt Q333 into Recovery Mode
Below are the methods using which you can boot Micromax Bolt Q333 into Recovery Mode.
Boot Micromax Bolt Q333 Recovery Mode using Hardware Buttons
- First of all, power off your phone.
- Now, press and hold the Volume Down and Power button together for a few seconds.
- Release the Power key as soon as you see the Android logo and wait for few seconds.
- But keep holding the Volume Down button to enter into the Recovery Mode.
Boot Micromax Bolt Q333 into Recovery using ADB command
- First of all, make sure you have installed Micromax Bolt Q333 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Micromax Bolt Q333 into Recovery Mode.
adb reboot recovery
Boot Micromax Bolt Q333 into Factory Mode
- First of all, power off the device.
- Press and hold Volume Up and Power buttons together for few seconds.
- Release the Power key as soon as you see the Android logo and wait for few seconds.
- But keep holding the Volume Up button to enter into the Factory Mode.
Related Tutorials
How to Factory Reset Micromax Bolt Q333
LEAVE A REPLY