MyPhone Hammer Iron 2 Recovery and Fastboot Mode

Want to Boot MyPhone Hammer Iron 2 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot MyPhone Hammer Iron 2 to Fastboot Mode or Recovery Mode.

MyPhone Hammer Iron 2 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

MyPhone Hammer Iron 2 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot MyPhone Hammer Iron 2 into Recovery Mode and Fastboot Mode.

Also: MyPhone Fun 5 Recovery Mode and Fastboot Mode

Boot MyPhone Hammer Iron 2 into Recovery Mode

Below are the methods using which you can boot MyPhone Hammer Iron 2 into Recovery Mode.

Boot MyPhone Hammer Iron 2 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Connect a USB cable to PC or Laptop.
3. Hold the Volume Up button for a few seconds and then connect the other end of the USB Cable to mobile.
4. Release all the buttons once you see the Android Boot Mode.
5. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
6. If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.
7. Now, your phone should boot into Recovery Mode.

Boot MyPhone Hammer Iron 2 into Recovery using ADB command

1. First of all, make sure you have installed MyPhone Hammer Iron 2 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot MyPhone Hammer Iron 2 into Recovery Mode.

   adb reboot recovery

Boot MyPhone Hammer Iron 2 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot MyPhone Hammer Iron 2 into Bootloader Mode or Fastboot Mode.

Boot MyPhone Hammer Iron 2 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Connect a USB cable to PC or Laptop.
3. Hold the Volume Up button for a few seconds and then connect the other end of the USB Cable to mobile.
4. Release all the buttons once you see the Android Boot Mode.
5. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
6. Now, your phone should boot into Fastboot Mode.

Boot MyPhone Hammer Iron 2 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot MyPhone Hammer Iron 2 into Factory Mode

1. First of all, power off the device.
2. Connect a USB cable to PC or Laptop.
3. Hold the Volume Down button for a few seconds and then connect the other end of the USB Cable to mobile.
4. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset MyPhone Hammer Iron 2