Symphony V47 Recovery and Fastboot Mode

Want to Boot Symphony V47 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Symphony V47 to Recovery Mode.

Symphony V47 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Symphony V47 to Recovery.

Also: Symphony V85 Recovery Mode and Fastboot Mode

Boot Symphony V47 into Recovery Mode

Below are the methods using which you can boot Symphony V47 into Recovery Mode.

Boot Symphony V47 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the Power key as soon as you see the Symphony Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
   

Boot Symphony V47 into Recovery using ADB command

1. First of all, make sure you have installed Symphony V47 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Symphony V47 into Recovery Mode.

   adb reboot recovery

Boot Symphony V47 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Symphony V47