Toshiba AT300SE Recovery and Fastboot Mode

Want to Boot Toshiba AT300SE into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Toshiba AT300SE to Recovery Mode.

Toshiba AT300SE Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Toshiba AT300SE to Recovery.

Also: Toshiba AT830 Regza 13.3 Recovery Mode and Fastboot Mode

Boot Toshiba AT300SE into Recovery Mode

Below are the methods using which you can boot Toshiba AT300SE into Recovery Mode.

Boot Toshiba AT300SE Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the keys as soon as you see the Boot Mode on the screen.
4. Now, your phone should boot into Recovery Mode.

Boot Toshiba AT300SE into Recovery using ADB command

1. First of all, make sure you have installed Toshiba AT300SE USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Toshiba AT300SE into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Toshiba AT300SE