Ulefone Armor 3WT Recovery and Fastboot Mode

Want to Boot Ulefone Armor 3WT into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Ulefone Armor 3WT to Recovery Mode.

Ulefone Armor 3WT Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Ulefone Armor 3WT to Recovery.

Also: Ulefone Power 3 Recovery Mode and Fastboot Mode

Boot Ulefone Armor 3WT into Recovery Mode

Below are the methods using which you can boot Ulefone Armor 3WT into Recovery Mode.

Boot Ulefone Armor 3WT Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the keys as soon as you see the Ulefone logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Ulefone Armor 3WT into Recovery using ADB command

1. First of all, make sure you have installed Ulefone Armor 3WT USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Ulefone Armor 3WT into Recovery Mode.

   adb reboot recovery

Boot Ulefone Armor 3WT into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Ulefone Armor 3WT