Verykool Lynx S3501 Recovery and Fastboot Mode

Want to Boot Verykool Lynx S3501 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Verykool Lynx S3501 to Recovery Mode.

Verykool Lynx S3501 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Verykool Lynx S3501 to Recovery.

Also: Verykool Leo JR S4005 Recovery Mode and Fastboot Mode

Boot Verykool Lynx S3501 into Recovery Mode

Below are the methods using which you can boot Verykool Lynx S3501 into Recovery Mode.

Boot Verykool Lynx S3501 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the keys as soon as you see the Verykool logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.
   

Boot Verykool Lynx S3501 into Recovery using ADB command

1. First of all, make sure you have installed Verykool Lynx S3501 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Verykool Lynx S3501 into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Verykool Lynx S3501