Vestel V3 5570 Recovery and Fastboot Mode

Want to Boot Vestel V3 5570 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Vestel V3 5570 to Recovery Mode.

Vestel V3 5570 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Vestel V3 5570 to Recovery.

Also: Vestel Venus Z10 Recovery Mode and Fastboot Mode

Boot Vestel V3 5570 into Recovery Mode

Below are the methods using which you can boot Vestel V3 5570 into Recovery Mode.

Boot Vestel V3 5570 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the Power key as soon as you see the Vestel Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
   

Boot Vestel V3 5570 into Recovery using ADB command

1. First of all, make sure you have installed Vestel V3 5570 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Vestel V3 5570 into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Vestel V3 5570