Wink City Recovery and Fastboot Mode

Want to Boot Wink City into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Wink City to Recovery Mode.

Wink City Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Wink City to Recovery.

Also: Wink Share SE Recovery Mode and Fastboot Mode

Boot Wink City into Recovery Mode

Below are the methods using which you can boot Wink City into Recovery Mode.

Boot Wink City Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Connect a USB cable to PC or Laptop.
3. Hold the Volume Up button for a few seconds and then connect the other end of the USB Cable to mobile.
4. But keep holding the Volume Up button until the Android Robot pops up on the screen.
5. Now, press the Power button to enter into the Recovery Mode.
   

Boot Wink City into Recovery using ADB command

1. First of all, make sure you have installed Wink City USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Wink City into Recovery Mode.

   adb reboot recovery

Boot Wink City into Factory Mode

1. First of all, power off the device.
2. Connect a USB cable to PC or Laptop.
3. Hold the Volume Down button for a few seconds and then connect the other end of the USB Cable to mobile.
4. But keep holding the Volume Down button until the desired mode pops up on the screen.
5. Now, your phone should boot into Factory Mode.
   

Related Tutorials

How to Factory Reset Wink City