Wiko U Pulse Recovery and Fastboot Mode

Want to Boot Wiko U Pulse into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Wiko U Pulse to Recovery Mode.

Wiko U Pulse Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Wiko U Pulse to Recovery.

Also: Wiko U Pulse Lite Recovery Mode and Fastboot Mode

Boot Wiko U Pulse into Recovery Mode

Below are the methods using which you can boot Wiko U Pulse into Recovery Mode.

Boot Wiko U Pulse Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the Power button as soon as you see the Wiko Logo on the screen.
4. Release the Volume Up button when the device boots into Recovery Mode.
   

Boot Wiko U Pulse into Recovery using ADB command

1. First of all, make sure you have installed Wiko U Pulse USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Wiko U Pulse into Recovery Mode.

   adb reboot recovery

Boot Wiko U Pulse into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Wiko U Pulse