Allview A20 Recovery and Fastboot Mode

Want to Boot Allview A20 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Allview A20 to Recovery Mode.

Allview A20 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Allview A20 to Recovery.

Also: Allview V4 Viper Recovery Mode and Fastboot Mode

Boot Allview A20 into Recovery Mode

Below are the methods using which you can boot Allview A20 into Recovery Mode.

Boot Allview A20 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the keys as soon as you see the Allview logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Allview A20 into Recovery using ADB command

1. First of all, make sure you have installed Allview A20 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Allview A20 into Recovery Mode.

   adb reboot recovery

Boot Allview A20 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Allview A20