Want to Boot Jinxing Digital S7300 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Jinxing Digital S7300 to Fastboot Mode or Recovery Mode.
Jinxing Digital S7300 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Jinxing Digital S7300 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Jinxing Digital S7300 into Recovery Mode and Fastboot Mode.
Also: Jinxing Digital S662 Recovery Mode and Fastboot Mode
Boot Jinxing Digital S7300 into Recovery Mode
Below are the methods using which you can boot Jinxing Digital S7300 into Recovery Mode.
Boot Jinxing Digital S7300 Recovery Mode using Hardware Buttons
- First of all, power off your phone.
- Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
- Release the Power button as soon as you see the Jinxing Digital Logo on the screen.
- Release the Volume Up button when the device boots into Recovery Mode.
Boot Jinxing Digital S7300 into Recovery using ADB command
- First of all, make sure you have installed Jinxing Digital S7300 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Jinxing Digital S7300 into Recovery Mode.
adb reboot recovery
Related Tutorials
How to Factory Reset Jinxing Digital S7300
LEAVE A REPLY