Wiko View 3 Recovery and Fastboot Mode

Want to Boot Wiko View 3 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Wiko View 3 to Recovery Mode.

Wiko View 3 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Wiko View 3 to Recovery.

Also: Wiko Wax Recovery Mode and Fastboot Mode

Boot Wiko View 3 into Recovery Mode

Below are the methods using which you can boot Wiko View 3 into Recovery Mode.

Boot Wiko View 3 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up + Volume Down and Power buttons together for a few seconds.
3. Release the keys as soon as you see the two options menu on the screen.
4. Now, press the Volume Up button to enter into the Recovery Mode.

Boot Wiko View 3 into Recovery using ADB command

1. First of all, make sure you have installed Wiko View 3 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Wiko View 3 into Recovery Mode.

   adb reboot recovery

Boot Wiko View 3 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Up + Volume Down and Power buttons together for few seconds.
3. Release the keys as soon as you see the two options menu on the screen.
4. Now, press the Volume Down button to enter into the Factory Mode.

Related Tutorials

How to Factory Reset Wiko View 3