Epik One Pebble Max Recovery and Fastboot Mode

Want to Boot Epik One Pebble Max into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Epik One Pebble Max to Fastboot Mode or Recovery Mode.

Epik One Pebble Max Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Epik One Pebble Max Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Epik One Pebble Max into Recovery Mode and Fastboot Mode.

Also: Epik One Jupiter One Recovery Mode and Fastboot Mode

Boot Epik One Pebble Max into Recovery Mode

Below are the methods using which you can boot Epik One Pebble Max into Recovery Mode.

Boot Epik One Pebble Max Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.
6. Now, your phone should boot into Recovery Mode.

Boot Epik One Pebble Max into Recovery using ADB command

1. First of all, make sure you have installed Epik One Pebble Max USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Epik One Pebble Max into Recovery Mode.

   adb reboot recovery

Boot Epik One Pebble Max into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Epik One Pebble Max into Bootloader Mode or Fastboot Mode.

Boot Epik One Pebble Max Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Epik One Pebble Max Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Epik One Pebble Max