BLU G40 Recovery and Fastboot Mode

Want to Boot BLU G40 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot BLU G40 to Recovery Mode.

BLU G40 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting BLU G40 to Recovery.

Also: BLU M8L 2022 Recovery Mode and Fastboot Mode

Boot BLU G40 into Recovery Mode

Below are the methods using which you can boot BLU G40 into Recovery Mode.

Boot BLU G40 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the keys as soon as you see the BLU logo and wait for few seconds.
4. If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.
5. Now, your phone should boot into Recovery Mode.

Boot BLU G40 into Recovery using ADB command

1. First of all, make sure you have installed BLU G40 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot BLU G40 into Recovery Mode.

   adb reboot recovery

Boot BLU G40 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot BLU G40 into Bootloader Mode or Fastboot Mode.

Boot BLU G40 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off, press and hold the Volume Up + Power button together for a few seconds.
3. Release the keys as soon as you see the BLU logo and wait for few seconds.
4. If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.
5. Now, your phone should boot into Recovery Mode.
6. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
7. Now, your phone should boot into Fastboot Mode.

Boot BLU G40 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset BLU G40