Want to Boot Alcatel Streak into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Alcatel Streak to Fastboot Mode or Recovery Mode.
Alcatel Streak Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Alcatel Streak Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Alcatel Streak into Recovery Mode and Fastboot Mode.
Also: Alcatel Pixi Glory A621B Recovery Mode and Fastboot Mode
Boot Alcatel Streak into Recovery Mode
Below are the methods using which you can boot Alcatel Streak into Recovery Mode.
Boot Alcatel Streak Recovery Mode using Hardware Buttons
- Power off your phone.
- Once the device is off, press and hold the Volume Up + Power button together for a few seconds.
- Release the keys as soon as you see the Alcatel logo and wait for few seconds.
- Now, your phone should boot into Recovery Mode.
Boot Alcatel Streak into Recovery using ADB command
- First of all, make sure you have installed Alcatel Streak USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Alcatel Streak into Recovery Mode.
adb reboot recovery
Boot Alcatel Streak into Fastboot Mode / Bootloader Mode
Below are the methods using which you can boot Alcatel Streak into Bootloader Mode or Fastboot Mode.
Boot Alcatel Streak Bootloader Mode/Fastboot Mode using Hardware Buttons
- Power off your Phone.
- Plug one end of the USB cable to PC and while holding the Volume Down button connect the other end of the cable to your device.
- Now, your phone should boot into Fastboot Mode.
Boot Alcatel Streak Bootloader Mode/Fastboot Mode using ADB command
Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.
Open Command Prompt (CMD) on your PC and enter the below command.
adb reboot bootloader
Related Tutorials
How to Factory Reset Alcatel Streak
LEAVE A REPLY