Wiko 10 Recovery and Fastboot Mode

Want to Boot Wiko 10 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Wiko 10 to Fastboot Mode or Recovery Mode.

Wiko 10 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Wiko 10 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Wiko 10 into Recovery Mode and Fastboot Mode.

Also: Wiko 10 5G Recovery Mode and Fastboot Mode

Boot Wiko 10 into Recovery Mode

Below are the methods using which you can boot Wiko 10 into Recovery Mode.

Boot Wiko 10 Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power button as soon as you see the Wiko Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.

Boot Wiko 10 into Recovery using ADB command

1. First of all, make sure you have installed Wiko 10 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Wiko 10 into Recovery Mode.

   adb reboot recovery

Boot Wiko 10 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Wiko 10 into Bootloader Mode or Fastboot Mode.

Boot Wiko 10 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Plug one end of the USB cable to PC or laptop and while holding the Volume Down button connect the other end of the cable to your device.
3. Now, your phone should boot into Fastboot Mode.

Boot Wiko 10 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot Wiko 10 Download Mode

1. Power off your Phone.
2. Press and hold Volume Up + Power buttons together for a few seconds.
3. Release the Power button as soon as you see the Wiko Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
5. Now, choose Update Mode using the Volume buttons and select it using the Power button.
6. Now, your phone should boot into Download Mode.

Related Tutorials

How to Factory Reset Wiko 10