Hisense U30 32GB Recovery and Fastboot Mode

Want to Boot Hisense U30 32GB into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Hisense U30 32GB to Fastboot Mode or Recovery Mode.

Hisense U30 32GB Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Hisense U30 32GB Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Hisense U30 32GB into Recovery Mode and Fastboot Mode.

Also: Hisense E32 Lite Recovery Mode and Fastboot Mode

Boot Hisense U30 32GB into Recovery Mode

Below are the methods using which you can boot Hisense U30 32GB into Recovery Mode.

Boot Hisense U30 32GB Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Hisense logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Hisense U30 32GB into Recovery using ADB command

1. First of all, make sure you have installed Hisense U30 32GB USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Hisense U30 32GB into Recovery Mode.

   adb reboot recovery

Boot Hisense U30 32GB into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Hisense U30 32GB into Bootloader Mode or Fastboot Mode.

Boot Hisense U30 32GB Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Hisense logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.
5. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
6. Now, your phone should boot into Fastboot Mode.

Boot Hisense U30 32GB Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Hisense U30 32GB