Alcatel OT-T608 Recovery and Fastboot Mode

Want to Boot Alcatel OT-T608 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Alcatel OT-T608 to Recovery Mode.

Alcatel OT-T608 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Alcatel OT-T608 to Recovery.

Also: Alcatel OT-986 Recovery Mode and Fastboot Mode

Boot Alcatel OT-T608 into Recovery Mode

Below are the methods using which you can boot Alcatel OT-T608 into Recovery Mode.

Boot Alcatel OT-T608 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up + Power button together for a few seconds.
3. Release the keys as soon as you see the Alcatel logo and wait for few seconds.
4. When You see Android bot image pops up start pressing Volume Up and Power key once.
5. Now, your phone should boot into Recovery Mode.

Boot Alcatel OT-T608 into Recovery using ADB command

1. First of all, make sure you have installed Alcatel OT-T608 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Alcatel OT-T608 into Recovery Mode.

   adb reboot recovery

Boot Alcatel OT-T608 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Alcatel OT-T608 into Bootloader Mode or Fastboot Mode.

Boot Alcatel OT-T608 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off, press and hold the Volume Down + Power button together for a few seconds.
3. Now, your phone should boot into Fastboot Mode.

Boot Alcatel OT-T608 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Alcatel OT-T608