Alcatel Tetra Recovery and Fastboot Mode

Want to Boot Alcatel Tetra into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Alcatel Tetra to Recovery Mode.

Alcatel Tetra Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Alcatel Tetra to Recovery.

Also: Alcatel Optus X Smart Recovery Mode and Fastboot Mode

Boot Alcatel Tetra into Recovery Mode

Below are the methods using which you can boot Alcatel Tetra into Recovery Mode.

Boot Alcatel Tetra Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up + Power button together for a few seconds.
3. Release the keys as soon as you see the Alcatel logo and wait for few seconds.
4. When You see Android bot image pops up start pressing Volume Up and Power key once.
5. Now, your phone should boot into Recovery Mode.

Boot Alcatel Tetra into Recovery using ADB command

1. First of all, make sure you have installed Alcatel Tetra USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Alcatel Tetra into Recovery Mode.

   adb reboot recovery

Boot Alcatel Tetra into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Alcatel Tetra into Bootloader Mode or Fastboot Mode.

Boot Alcatel Tetra Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Plug one end of the USB cable to PC and while holding the Volume Down button connect the other end of the cable to your device.
3. Now, your phone should boot into Fastboot Mode.

Boot Alcatel Tetra Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot Alcatel Tetra into Download Mode

1. Power off your Phone.
2. Plug one end of the USB cable to PC and while holding the Volume Down + Volume Up button connect the other end of the cable to your device.
3. Release the Volume button once the device boots into Download Mode.
4. To exit the Download Mode, press and hold the Power button until the device reboots.

Related Tutorials

How to Factory Reset Alcatel Tetra