AllCall S5500 Recovery and Fastboot Mode

Want to Boot AllCall S5500 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot AllCall S5500 to Recovery Mode.

AllCall S5500 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting AllCall S5500 to Recovery.

Also: AllCall Mix 2 Recovery Mode and Fastboot Mode

Boot AllCall S5500 into Recovery Mode

Below are the methods using which you can boot AllCall S5500 into Recovery Mode.

Boot AllCall S5500 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Boot Mode on the screen.
4. Now, choose Recovery Mode using the Volume Up button and select it using the Volume Down.
5. If the Android Bot with Red exclamation pops up, then press Volume Down + Power and click Volume Up once.
6. Now, your phone should boot into Recovery Mode.

Boot AllCall S5500 into Recovery using ADB command

1. First of all, make sure you have installed AllCall S5500 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot AllCall S5500 into Recovery Mode.

   adb reboot recovery

Boot AllCall S5500 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot AllCall S5500 into Bootloader Mode or Fastboot Mode.

Boot AllCall S5500 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Boot Mode on the screen.
4. Now, choose Fastboot Mode using the Volume Up button and select it using the Volume Down.
5. Now, your phone should boot into Fastboot Mode.

Boot AllCall S5500 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot AllCall S5500 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset AllCall S5500