Alldocube iPlay 8T Recovery and Fastboot Mode

Want to Boot Alldocube iPlay 8T into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Alldocube iPlay 8T to Fastboot Mode or Recovery Mode.

Alldocube iPlay 8T Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Alldocube iPlay 8T Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Alldocube iPlay 8T into Recovery Mode and Fastboot Mode.

Also: Alldocube iPlay 40 Pro Recovery Mode and Fastboot Mode

Boot Alldocube iPlay 8T into Recovery Mode

Below are the methods using which you can boot Alldocube iPlay 8T into Recovery Mode.

Boot Alldocube iPlay 8T Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Now, your phone should boot into Recovery Mode.

Boot Alldocube iPlay 8T into Recovery using ADB command

1. First of all, make sure you have installed Alldocube iPlay 8T USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Alldocube iPlay 8T into Recovery Mode.

   adb reboot recovery

Boot Alldocube iPlay 8T into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Alldocube iPlay 8T into Bootloader Mode or Fastboot Mode.

Boot Alldocube iPlay 8T Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Now, your phone should boot into Recovery Mode.
4. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Alldocube iPlay 8T Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Alldocube iPlay 8T