BLU M10L Pro Recovery and Fastboot Mode

Want to Boot BLU M10L Pro into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot BLU M10L Pro to Fastboot Mode or Recovery Mode.

BLU M10L Pro Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

BLU M10L Pro Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot BLU M10L Pro into Recovery Mode and Fastboot Mode.

Also: BLU C5L+ (2021) Recovery Mode and Fastboot Mode

Boot BLU M10L Pro into Recovery Mode

Below are the methods using which you can boot BLU M10L Pro into Recovery Mode.

Boot BLU M10L Pro Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the BLU logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot BLU M10L Pro into Recovery using ADB command

1. First of all, make sure you have installed BLU M10L Pro USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot BLU M10L Pro into Recovery Mode.

   adb reboot recovery

Boot BLU M10L Pro into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot BLU M10L Pro into Bootloader Mode or Fastboot Mode.

Boot BLU M10L Pro Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Now, press and hold the Volume Down and Power buttontogether for a few seconds.
3. Now, your phone should boot into Fastboot Mode.

Boot BLU M10L Pro Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset BLU M10L Pro