Bush Spira B5 Recovery and Fastboot Mode

Want to Boot Bush Spira B5 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Bush Spira B5 to Fastboot Mode or Recovery Mode.

Bush Spira B5 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Bush Spira B5 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Bush Spira B5 into Recovery Mode and Fastboot Mode.

Also: Bush Spira D5 Recovery Mode and Fastboot Mode

Boot Bush Spira B5 into Recovery Mode

Below are the methods using which you can boot Bush Spira B5 into Recovery Mode.

Boot Bush Spira B5 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Down and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.
6. Now, your phone should boot into Recovery Mode.

Boot Bush Spira B5 into Recovery using ADB command

1. First of all, make sure you have installed Bush Spira B5 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Bush Spira B5 into Recovery Mode.

   adb reboot recovery

Boot Bush Spira B5 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Bush Spira B5 into Bootloader Mode or Fastboot Mode.

Boot Bush Spira B5 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold Volume Down and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Bush Spira B5 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Bush Spira B5