Casper Via S Recovery and Fastboot Mode

Want to Boot Casper Via S into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Casper Via S to Fastboot Mode or Recovery Mode.

Casper Via S Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Casper Via S Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Casper Via S into Recovery Mode and Fastboot Mode.

Also: Casper Via F1 Recovery Mode and Fastboot Mode

Boot Casper Via S into Recovery Mode

Below are the methods using which you can boot Casper Via S into Recovery Mode.

Boot Casper Via S Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up + Power button together for a few seconds.
3. Release the Power button as soon as you see the Casper Logo on the screen.
4. Release the Volume Up button when the device boots into Recovery Mode.

Boot Casper Via S into Recovery using ADB command

1. First of all, make sure you have installed Casper Via S USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Casper Via S into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Casper Via S