Coolpad Daguan 40S Recovery and Fastboot Mode

Want to Boot Coolpad Daguan 40S into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Coolpad Daguan 40S to Fastboot Mode or Recovery Mode.

Coolpad Daguan 40S Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Coolpad Daguan 40S Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Coolpad Daguan 40S into Recovery Mode and Fastboot Mode.

Also: Coolpad Cool Play C7 Recovery Mode and Fastboot Mode

Boot Coolpad Daguan 40S into Recovery Mode

Below are the methods using which you can boot Coolpad Daguan 40S into Recovery Mode.

Boot Coolpad Daguan 40S Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Coolpad logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.
   

Boot Coolpad Daguan 40S into Recovery using ADB command

1. First of all, make sure you have installed Coolpad Daguan 40S USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Coolpad Daguan 40S into Recovery Mode.

   adb reboot recovery

Boot Coolpad Daguan 40S into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Coolpad Daguan 40S into Bootloader Mode or Fastboot Mode.

Boot Coolpad Daguan 40S Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Coolpad logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.
5. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
6. Now, your phone should boot into Fastboot Mode.

Boot Coolpad Daguan 40S Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Coolpad Daguan 40S