Denver SDQ-55034L Recovery and Fastboot Mode

Want to Boot Denver SDQ-55034L into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Denver SDQ-55034L to Fastboot Mode or Recovery Mode.

Denver SDQ-55034L Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Denver SDQ-55034L Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Denver SDQ-55034L into Recovery Mode and Fastboot Mode.

Also: Denver SDQ-57004L Recovery Mode and Fastboot Mode

Boot Denver SDQ-55034L into Recovery Mode

Below are the methods using which you can boot Denver SDQ-55034L into Recovery Mode.

Boot Denver SDQ-55034L Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up + Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.
6. Now, your phone should boot into Recovery Mode.

Boot Denver SDQ-55034L into Recovery using ADB command

1. First of all, make sure you have installed Denver SDQ-55034L USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Denver SDQ-55034L into Recovery Mode.

   adb reboot recovery

Boot Denver SDQ-55034L into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Denver SDQ-55034L into Bootloader Mode or Fastboot Mode.

Boot Denver SDQ-55034L Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off, press and hold the Volume Up + Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Denver SDQ-55034L Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot Denver SDQ-55034L into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Denver SDQ-55034L