Doogee X10S Recovery and Fastboot Mode

Want to Boot Doogee X10S into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Doogee X10S to Fastboot Mode or Recovery Mode.

Doogee X10S Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Doogee X10S Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Doogee X10S into Recovery Mode and Fastboot Mode.

Also: Doogee Y8 Plus Recovery Mode and Fastboot Mode

Boot Doogee X10S into Recovery Mode

Below are the methods using which you can boot Doogee X10S into Recovery Mode.

Boot Doogee X10S Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. If Android Robot appears, press the Volume Up + Power button.
6. Now, your phone should boot into Recovery Mode.

Boot Doogee X10S into Recovery using ADB command

1. First of all, make sure you have installed Doogee X10S USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Doogee X10S into Recovery Mode.

   adb reboot recovery

Boot Doogee X10S into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Doogee X10S into Bootloader Mode or Fastboot Mode.

Boot Doogee X10S Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Doogee X10S Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot Doogee X10S into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Doogee X10S