Epik One Leo Pro Recovery and Fastboot Mode

Want to Boot Epik One Leo Pro into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Epik One Leo Pro to Fastboot Mode or Recovery Mode.

Epik One Leo Pro Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Epik One Leo Pro Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Epik One Leo Pro into Recovery Mode and Fastboot Mode.

Also: Epik One X516 Recovery Mode and Fastboot Mode

Boot Epik One Leo Pro into Recovery Mode

Below are the methods using which you can boot Epik One Leo Pro into Recovery Mode.

Boot Epik One Leo Pro Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. If Android Robot appears, press the Volume Up and Power button.
6. Now, your phone should boot into Recovery Mode.

Boot Epik One Leo Pro into Recovery using ADB command

1. First of all, make sure you have installed Epik One Leo Pro USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Epik One Leo Pro into Recovery Mode.

   adb reboot recovery

Boot Epik One Leo Pro into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Epik One Leo Pro into Bootloader Mode or Fastboot Mode.

Boot Epik One Leo Pro Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Epik One Leo Pro Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Epik One Leo Pro