Evercoss Winner Tab V AT8B Recovery and Fastboot Mode

Want to Boot Evercoss Winner Tab V AT8B into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Evercoss Winner Tab V AT8B to Recovery Mode.

Evercoss Winner Tab V AT8B Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Evercoss Winner Tab V AT8B to Recovery.

Also: Evercoss W7B Recovery Mode and Fastboot Mode

Boot Evercoss Winner Tab V AT8B into Recovery Mode

Below are the methods using which you can boot Evercoss Winner Tab V AT8B into Recovery Mode.

Boot Evercoss Winner Tab V AT8B Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Down and Power button together for a few seconds.
3. Release the Power key as soon as you see the Evercoss Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
   

Boot Evercoss Winner Tab V AT8B into Recovery using ADB command

1. First of all, make sure you have installed Evercoss Winner Tab V AT8B USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Evercoss Winner Tab V AT8B into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Evercoss Winner Tab V AT8B