Gionee Elife S8 Lite GN9012 Recovery and Fastboot Mode

Want to Boot Gionee Elife S8 Lite GN9012 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Gionee Elife S8 Lite GN9012 to Recovery Mode.

Gionee Elife S8 Lite GN9012 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Gionee Elife S8 Lite GN9012 to Recovery.

Also: Gionee GN5001L Recovery Mode and Fastboot Mode

Boot Gionee Elife S8 Lite GN9012 into Recovery Mode

Below are the methods using which you can boot Gionee Elife S8 Lite GN9012 into Recovery Mode.

Boot Gionee Elife S8 Lite GN9012 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power key as soon as you see the Gionee Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
   

Boot Gionee Elife S8 Lite GN9012 into Recovery using ADB command

1. First of all, make sure you have installed Gionee Elife S8 Lite GN9012 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Gionee Elife S8 Lite GN9012 into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Gionee Elife S8 Lite GN9012