Hisense A7 Recovery and Fastboot Mode

Want to Boot Hisense A7 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Hisense A7 to Recovery Mode.

Hisense A7 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Hisense A7 to Recovery.

Also: Hisense Infinity E8 Recovery Mode and Fastboot Mode

Boot Hisense A7 into Recovery Mode

Below are the methods using which you can boot Hisense A7 into Recovery Mode.

Boot Hisense A7 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Down and Power button together for a few seconds.
3. Release the Power key as soon as you see the Hisense Logo on the screen.
4. Release the Volume Down button when the device boots into Recovery Mode.
   

Boot Hisense A7 into Recovery using ADB command

1. First of all, make sure you have installed Hisense A7 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Hisense A7 into Recovery Mode.

   adb reboot recovery

Boot Hisense A7 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Hisense A7 into Bootloader Mode or Fastboot Mode.

Boot Hisense A7 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off. Press and hold the Volume Down and Power button together for a few seconds.
3. Release the Power key as soon as you see the Hisense Logo on the screen.
4. Release the Volume Down button when the device boots into Recovery Mode.

Boot Hisense A7 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Hisense A7